Just a few years ago, non-alcoholic beer was a last resort for drivers and people tended to avoid it. Today, it is one of the fastest growing categories in the beer world, and breweries are investing in its development as carefully as in their traditional lagers. In this article, we will look at how non-alcoholic beer is produced , what makes it technologically demanding, and why interest in it is growing.
Non-alcoholic beer is brewed from the same ingredients as regular beer, i.e. malt, hops, yeast and water . The difference is that the resulting drink contains only a minimum of alcohol. In the Czech Republic, beer with an alcohol content of up to 0.5% by volume is considered non-alcoholic . However, specific labeling rules may vary by country and are adjusted over time, so it is a good idea to check the information on the label or with the manufacturer for exported beers.
It's important to remember that non-alcoholic doesn't mean completely alcohol-free . Trace amounts of alcohol are also commonly found in many other foods, such as some fruit juices and fermented foods. For most people, this is insignificant, but for some groups, which we'll discuss below, it can be an important detail. If you want to be sure, look for the 0.0% label , which manufacturers use for beers with no measurable alcohol content.
Brewers have two main paths to non-alcoholic beer. The first involves no alcohol at all or only a small amount . The second path involves brewing the beer in a conventional manner and then removing the alcohol.
The first option uses limited or interrupted fermentation . The yeast converts malt sugars into alcohol and carbon dioxide, so if their work is stopped early, no alcohol is produced. Some brewers also use special strains of yeast that only partially ferment the malt sugars. The difficulty is that unfermented sugars remain in the drink and can give it a sweet, malty flavor that brewers must balance with other processes.
The second option starts with a classic beer. The beer is brewed, fermented, and after maturation, the alcohol is removed from it . The advantage is that the base of the drink tastes like real beer, because it has gone through a regular process. The disadvantage is the technological complexity, because removing the alcohol also changes other components of the taste and aroma.
Removing alcohol from finished beer is a frequently used procedure and relies on two groups of technologies.
The first is vacuum distillation . Alcohol evaporates at a lower temperature than water, and when the pressure is reduced, it evaporates at even lower temperatures. The vacuum means the beer doesn't have to be heated to high temperatures, which helps preserve the flavor and aroma . The evaporated alcohol is separated and the remaining liquid is processed into the finished beer.
The second group is membrane technologies , such as reverse osmosis or dialysis . Beer flows through fine membranes that allow small molecules, i.e. water and alcohol, to pass through, while retaining larger particles that give the beer its flavor, color, and body. After the alcohol is separated, water is added to the retained components, resulting in a non-alcoholic beer. This process is particularly suitable where the brewery wants to preserve as much of the original character as possible.
Both methods have in common that they require modern equipment and careful control of the entire process . This is why the production of quality non-alcoholic beer is often more expensive than the consumer would think, and breweries enter into it with respect.
Alcohol in beer is not only an active ingredient, but also a carrier of flavor and a feeling of fullness in the mouth . When it is removed, the beer can feel thinner and more empty. That's why brewers try to make up for the taste by other means.
For example, adjusting the malt base helps , choosing malts that add body and fullness. Hops play an important role , whose aroma and bitterness can replace part of the impression that alcohol would otherwise create. Careful selection of yeast and control of fermentation temperatures also come into play. In some beers, natural flavors or fruit ingredients are added, which make non-alcoholic beer a separate style, not just an imitation of the classics.
A special chapter is the foam . It is created thanks to proteins and hop substances, and in non-alcoholic beers it must be ensured that it is as thick and stable as in classic lager. Therefore, technologists pay attention to the composition of the malt and the method of bottling. The result varies between breweries, which is why it is worth trying several brands.
There is not a single reason behind the growth of non-alcoholic beers, but several trends that come together .
● Greater interest in moderation and a healthier lifestyle , where people want to enjoy the taste of beer but do not want to drink alcohol
● Improved quality , as modern technology has resulted in beers that no longer feel like a compromise
● Practical situations , such as driving, work the next day, sports activities, or an evening when one wants to have a beer but no longer wants alcohol
● A wider selection , from light and dark lagers to flavored beers and specials, so almost everyone can choose
The popularity is also reflected in a change in social attitudes. In the past, people were expected to drink alcohol when they had beer. Today, it is completely natural to order non-alcoholic beer without explanation, and many establishments are therefore expanding their offerings. For breweries, this is an opportunity to reach customers who would otherwise not drink beer at all.
Non-alcoholic beer is most often associated with driving and an active lifestyle. It is true that non-alcoholic beer is a practical choice for most drivers, but at the 0.5% limit, it is good to take into account that it is not zero. Those who need absolute certainty should reach for the 0.0% option and follow the applicable regulations and their own judgment.
health claims should be treated with caution . Non-alcoholic beer is sometimes described as a good post-workout drink because it contains water, sugars and minerals. However, it is not a miracle drink or a replacement for a drinking regimen, and its energy value may be higher than one would expect because it retains malt sugars.
Pregnant women, people who are not allowed to drink alcohol for any reason, or people in the process of quitting deserve special attention . For them, even trace amounts of alcohol are something that should be discussed with a doctor, or they should choose the 0.0% option exclusively.
When choosing, it's best to consider what you expect from a beer . If you're looking for the taste of a classic lager, go for a traditional type from a brewery that has been brewing Czech beer for a long time. If you're tempted to experiment, try flavored variants or specials. Non-alcoholic beers vary greatly between manufacturers, so if your first try doesn't suit you, it doesn't mean the entire category isn't for you.
When serving, similar rules apply as with regular beer. A clean and rinsed glass helps the foam, the right temperature, not too cold, will release the flavor and aroma, and freshness is important here too. Non-alcoholic beers usually have a clearly stated best before date, which is a good idea to follow, as their flavor can change over time. If you are pouring beer on tap or opening it for more than one person, pour it slowly and carefully to preserve the foam.
At the Bernard Beer Spa, unlimited Bernard draft beer is served right next to the bath during the procedure. However, no one forces you to drink alcohol, and the spa also accommodates guests who do not want to or cannot drink beer. For guests on a gluten-free diet, Bernard 12° gluten-free bottled beers or non-alcoholic beer are available . The Bernard brewery also produces non-alcoholic beers, for example under the Bernard Free brand. However, it is better to check the current offer of non-alcoholic drinks directly at the spa before visiting, as it may change. It is important not to confuse the non-alcoholic beer that you can drink with the beer mixture in the bath . It is intended for skin care, not for drinking.
There are several common misconceptions about non-alcoholic beers that are worth clarifying.
The first is that non-alcoholic beer is just sweetened water . In reality, it is made from brewing ingredients, undergoes a demanding technological process, and quality pieces have their own character. The second myth claims that non-alcoholic beer is always healthier than classic beer . Although it does not contain alcohol, it may contain malt sugars, which is why it is more suitable as an alternative than as a health drink. The third misconception is that it tastes the same to everyone . The differences between brands are large and it is worth looking for the one that suits your taste.
A common question is whether non-alcoholic beer really has zero alcohol content . The answer is that it depends on the label. Beers with a value of up to 0.5% may contain trace amounts, while 0.0% variants do not contain alcohol. If this is important to you, read the label carefully.
Non-alcoholic beer is not a compromise, but a separate category with its own technology and its own fans . Whether you drink it for driving, sports, moderation or simply because you like it, today's menu offers a more diverse selection than ever before.
Spa as such appeared 4 thousand years ago in India. The ancient Chinese and Egyptians also knew about the beneficial effects of spa on the human body. The history of beer production dates back to the 7th millennium BC, when beer was discovered, probably by mistake, by the ancient Sumerians. They mistook the grain they were growing and the principle of fermentation was invented.
The connection between beer and baths is officially known from the Middle Ages, when the knowledge of the beneficial effects of bathing in beer was established from the sources. The preventive effects of beer baths and beer baths had already been discovered at this time.
The history of beer production dates back to the 7th millennium BC, when beer was discovered, somewhat accidentally, by the ancient Sumerians. It was the method of making beer that began in the poor storage of the grain they grew. The grain was stored in earthenware vessels into which water was poured, and thus the principle of fermentation was discovered.
The production process has remained unchanged for centuries - everything starts with the milling of malt and the subsequent brewing of beer. The wort is then cooled and propagated yeast is used, followed by the main fermentation. This semi-finished beer is placed in beer tanks where the beer lies and matures. After the beer has lain and matured, it undergoes flint and microbiological filtration. This is where all beer lovers rejoice, as after these procedures the beer is bottled and shipped.